EXAMPLE: CS14NV15-10KA3030 LV15 RSN LN3% WT-14015-NE-V0
Standard features
| Series | Rotor | Model | Connect. | Packg. | Ohm value | Taper | Tolerance | Life |
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| CS14 | N | V15 | - | 10K | A | 3030 | LV15 |
Extra features
| Track | Detents | Snap in | Housing | Rotor | Wiper | Linearity | Oper. Tª |
|---|---|---|---|---|---|---|---|
| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| RSN | LN3% |
Assembled accessory
| Assembly | Ref # | Color | Flammability |
|---|---|---|---|
| - | 18 | - | - |
| WT | -14015 | -NE | -V0 |
| Standard configuration: | CS14 Through-hole | CS14 SMD |
|---|---|---|
| Dimensions: | 14mm | |
| Protection: | IP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0 | |
| Substrate: | Carbon technology | Carbon technology, special for high temperature |
| Color: | Blue housing + white rotor | Brown housing +grey rotor |
| Packaging: | Bulk | T & R |
| Wiper position: | at 50% ±15º | |
| Terminals: | Straight, without crimping. | J-Lead |
| Marking: | Resistive value marked on housing. Others on request. | |
Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes all special specifications. Example: CS14NV15-10K CODE C00111.
1 Series
 CS14 |
2 Rotors
| B | D* | E | F* | G | K | M | N* | P | T* | X | Y* | Z* |
| *Rotors available for versions with >15.000 turns | ||||||||||||
3 Model and Pitch
| H0 | H2,5 | H5 | HP | V12,5 | V12,5x5 | V15 | V15...CFF | VSMD | VSMD...CY |
4 Connector - Only available with HP model
| SHORT latching shape and groove at INITIAL terminal side | SI |
| SHORT latching shape and groove at FINAL terminal side | SF |
| LONG latching shape and groove at INITIAL terminal side | LI |
| LONG latching shape and groove at FINAL terminal side | LF |
5 Packaging
| Packaging | through-hole | SMD models |
| Bulk | (blank)...(1) | (blank)...(1) |
| T&R (Tape and 13” reel) | (N.A.)(2) | T&R |
| T&R (Tape and 15” reel) | (N.A.)(2) | T&R15 |
| Big Box: | ||
| (1) If blank, bulk packaging is implied. (2) N.A., Not Applicable: Tape and Reel packaging is only available for SMD terminals. | ||
6 Resistance Value
| 100Ω | 200Ω | 220Ω | 250Ω | 470Ω | 500Ω | 1KΩ | 2KΩ | ... | 500KΩ | 1MΩ | 2MΩ | 2M2Ω | 4M7Ω | 5MΩ |
| 100 | 200 | 220 | 250 | 470 | 500 | 1K | 2K | 500K | 1M | 2M | 2M2 | 4M7 | 5M |
7 Resistance law / taper
| Lin - Linear | A |
| Log- Logarithmic | B |
| Antilog-Antilogarithmic | C |
| - Special tapers have codes assigned: | CODE YXXXXX |
8 Tolerance
| ±20% | ±30% | +50%,-30% | ±10% | ±5% |
| 2020 | 3030 | 5030 | 1010 | 0505 |
9 Operating Life (Cycles)
| Standard (15.000 turns) | LV15 |
| Long life: LV + number of turns. i.e: LV100 for 100.000 turns, LV150, LV1M | LVXX: ex: LV100 |
10 Cut Track - Open circuit.
| CS14 already has an open circuit area at the base of the potentiometer (between 330º and 0º). Additional cut tracks can be studied on request. |
11 Detents (DT)
| X number of detents: ex.16 detents | XDT, ex:16DT |
12 Terminals
| SNAP IN P | SNP |
| SNAP IN R | SNR |
| Shorter tip of terminal, TPXX, where XX is tip length (under request) | TPXX, ex: TP30 |
| Steel Terminals | SH |
13 Housing
| Color: For colors other than standard: -See color chart below- | CJ-color, ex., red: CJ-RO |
14 Rotor
| Rotors N, T, Z | RSN |
| All others rotors: | (leave blank) |
| Color: For colors other than standard: -See color chart below- | RT-color; ex., blue: RT-AZ |
| * Self extinguishable property V0 for housing and rotorNot V0 (by default)Housing and rotor V0Only housing V0Only rotor V0 | CJ-V0, RT-V0(blank)V0 |
15 Wiper
| Wiper position (Standard: 50% ± 15º) | (leave blank) |
| Initial or CCW | PI |
| Final or CW | PF |
| Others: following clock positions; at 3 hours: P3H | PXH, ex: P3H |
| Wiper torque (Standard: <2.5Ncm, for detents: <3.5) | (leave blank) |
| Wiper torque Special low torque for 15.000 turns <1.5 Ncm | PGB |
| Wiper torque Standard for >15.000 turns <1.5 Ncm | (leave blank) |
| Stronger or softer torque feeling is available on request. |
16 Linearity
| Standard linearity 3% | (leave blank) |
| Independent linearity controlled and below x%. Ex: 3% | LNx%; ex: LN3% |
| Absolute linearity controlled and below x%. Ex: 2,5% | LAx%, ex: LA2,5% |
17 Operating Temperature
| -25ºC...+70ºC (standard) | (blank) |
| -25ºC...+85ºC | TªD |
| -25ºC...+105ºC | TªB |
18 Potentiometers with assembled accessories
| Assembled from terminal side | WT |
| Assembled from collector side | WTI |
| Accessory ReferenceSee list of shafts and thumbwheels available | -XXXXX Example: 14117 |
| Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.) | YY Example, white: BA(leave blank) -V0 |
| For ordering spare accessories: Accessory reference - color- flammability. Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel | XXXX-YY-V0 |
Color chart for rotor, housing and accessories
| Black (1) | White | Neutral | Transp. | Red | Green | Yellow | Blue | Grey | Brown |
|---|---|---|---|---|---|---|---|---|---|
| NE | BA | IN | TA | RO | VE | AM | AZ | GS | MR |
| (1) black is not an option for housing. | |||||||||
