Q16 Tapers
The CS14 core potentiometer has a linear taper that provides the voltage ratios indicated at each detent shown in the graph. Non overlapping voltage between contiguous positions is guaranteed….
The CS14 core potentiometer has a linear taper that provides the voltage ratios indicated at each detent shown in the graph. Non overlapping voltage between contiguous positions is guaranteed….
R is the standard rotor for Q16. Other options can be made under study. R This drawing shows the rotor at 50% position in order to better depict the dimensions…
of the shaft is marked with “L” in the table below, as shown in the drawing:H potentiometer + shaft V potentiometer + shaft Shaft 14042 14065 14117 14056 14081 14187…
By default, terminals are always straight, as shown on the “models” section. ACP can provide crimped terminals (with snap in, “SNP” or “SNR”), to better hold the component to the…
to the top of the shaft is marked with “L” in the table below, as shown in the drawings:H potentiometer + shaft V potentiometer + shaft Shaft 14042 14065 14117…