QJ16 Tapers
The core potentiometer is a standard 245º linear taper with a 5% absolute linearity. The mechanical rest position corresponds to the physical middle position, hence to the central value of…
The core potentiometer is a standard 245º linear taper with a 5% absolute linearity. The mechanical rest position corresponds to the physical middle position, hence to the central value of…
dust and also against water splashing), according to IEC 60529. Plastic materials can be self-extinguishable according to UL 94 V-0 under request. Thumbwheels and shafts can be provided either separately…
according to UL 94 V-0 for ACP’s cermet potentiometers. Tapers can be linear, log and antilog; special tapers can also be studied. Potentiometers can be manufactured in a wide range…
IEC 60529. Plastic materials can be self-extinguishable according to UL 94 V-0 under request. Through-hole and SMD configurations are available. Terminals and collector are manufactured in tinned brass, although versions…
The following typical test results (with 95% confidence) are given at 23ºC ±2ºC and 50% ±25% RH. QJ16 Through-hole Test conditions Typical variation of nominal resistance Linearity after test Damp…
40°C and 95% RH ±20% Temperature Coefficient 16 h at 85ºC, plus 2 h at –25ºC ±20% Load Life 1.000 h. at 50°C ±20% Mechanical Life 15.000 turns at 10…
h. at 40°C and 95% RH ±20% Temperature Coefficient 16 h at 85ºC, plus 2 h at –25ºC ±20% Load Life 1.000 h. at 50°C ±20% Mechanical Life 15.000 turns…
IEC 60529. Plastic materials can be self-extinguishable according to UL 94 V-0 under request. Through-hole and SMD configurations are available. Terminals and collector are manufactured in tinned brass, although versions…
Shafts are available in different colors (color chart in “how to order” section) and with self-extinguishable property, according to UL 94 V-0, under request. ACP can study special shaft designs….
Shafts are sold separately. They can be inserted from either top or below side. Please consult ACP for studying special designs. Rotor inner dimensions shown for customer’s own shaft design….