EXAMPLE: QJ16RV15-10KA3030 LV10
Standard features
Series | Rotor | Model | Packg. | Ohm value | Taper | Tolerance | Life | Mechanical Angle |
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
QJ16 | R | V15 | - | 10K | A | 3030 | LV10 | ±45º (Blank) |
Standard configuration: | QJ16 |
---|---|
Dimensions: | 16x15mm |
Protection: | IP 54, On request: Self extinguishable, to meet UL 94 V0 |
Core potentiometer: | CA14 // RS14 |
Packaging: | Bulk |
Wiper position: | Middle position |
Terminals: | Straight |
Marking: | Resistive value marked on housing. Others on request. |
1 Series
![]() |
2 Rotors
R | Others under study |
3 Model and Pitch
V15 | VSMD under study |
4 Packaging
Packaging | through-hole |
Bulk | (blank)...(1) |
(1) If blank, bulk packaging is implied. |
5 Resistance Value
100Ω | 200Ω | 220Ω | 250Ω | 470Ω | 500Ω | 1KΩ | 10KΩ Standard | ... | 5MΩ |
100 | 200 | 220 | 250 | 470 | 500 | 1K | 10K | 5M |
6 Resistance law / taper
Lin - Linear | A |
Others under study. Code will be assigned case by case. |
7 Tolerance
100Ω ≤ Rn ≤ 100KΩ: | 100KΩ < Rn ≤ 1MΩ: | 1MΩ < Rn ≤ 5MΩ: |
±30% | ±30% | +50%, -30% |
3030 | 3030 | 5030 |
8 Operating Life (Cycles)
Standard (10.000 cycles) | LV10 |
Long life: LV + number of cycles. ex: LV20 for 20.000 cycles | LVXX: ex: LV20 |
9 Mechanical Angle
Standard: ±45º | Leave blank |
Other configuration under study |
10 Terminals
By default, terminals are always straigh | (leave blank) |
SNAP IN P | SNP |
Steel Terminals | SH |
11 Flammability
Standard: Non self extinguishable | (leave blank) |
All housings and rotors self extinguishable according to UL 94 V0 | V0 |
Only Q16 housing and rotor self extinguishable V0 | Q-V0 |
12 Delivery position
Standard, middle position | (leave blank) |
13 Special Marking
Special marking | GRE |