How to Order
ACP’s switches (COM) follow the same configuration as the potentiometers, as shown in previous sections of this catalogue. The word COM needs to be added to the description. The cells 5, 6 and 7 (value, taper and tol) are left blank. If the switching angle is different from our standard, then it should be indicated.
Examples:
From CA9: COMCA9MH2,5 2DT SNP PI WT-9005-BA (switch in configuration CA9MH2,5 with 2 detents, terminals with snap in, wiper at CCW position, and white shaft reference 9005 already inserted).
Example: Standard Features
| Series | Rotor | Model | Packg. | Ohm value | Taper | Tolerance | Life | |
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| COM | CA9 | M | H2,5 | - | - | - |
Example: Extra features
| Track | Collector | Terminals | Housing | Rotor | Wiper position | Linearity |
|---|---|---|---|---|---|---|
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| 2DT | SNP | PI |
Example: Assembled Accesory
| Assembly | Ref# | Color | Flam. |
|---|---|---|---|
| 16 | 17 | ||
| WT | -9005 | -BA |
Examples:
From CA14: COMCA14PV15 AC45º±15º (switch in configuration CA14V15, switching angle at 45º).
Example: Standard features
| Series | Rotor | Model | Packg. | Ohm value | Taper | Tolerance | Life | |
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| COM | CA14 | P | V15 | - | - | - |
Example: Extra features
| Track | Collector | Terminals | Housing | Rotor | Wiper position | Linearity |
|---|---|---|---|---|---|---|
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| AC45º±15º |
Example: Assembled accessory
| Assembly | Ref# | Color | Flam. |
|---|---|---|---|
| 16 | 17 |
