CAR14 – CER14 Potentiometers with cut track
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications. Mechanical life with cut track…
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications. Mechanical life with cut track…
Rotors are drawn in their standard positioning, 50% of rotation. Alternative delivery positioning can be requested. Accessories in this catalogue are designed for N, Z and T rotors,…
All models shown here have shaft 14187, but other shafts can be chosen from the shafts section. The D dimension indicated on the drawings refers to the possible length of…
ACP’s patented detent (DT) feature is especially suitable for control applications where the end user will turn a knob inserted in the potentiometer. Detents can be used to…
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications. Mechanical life with cut track…
By default, terminals are always straight, as shown on the “models” section. ACP can provide crimped terminals (with snap in, “SNP” or “SNR”), to better hold the component to the…
Should the shaft need to be positioned differently than shown on the “models” section on this catalogue, a drawing with the exact position is kindly requested….
Potentiometers model With shaft or thumbwheel inserted? Pieces per bigger box (250 x 150 x70, CG on description) H0 – HC0 – H2,5 – H4 – H5 -…
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications. Mechanical life with cut track…
All models shown here have the most common rotor for 14mm potentiometers: the N rotor. Different rotors are available from the menu above.V15 VR15…