CA9 – CE9 Potentiometers with detents
ACP’s patented detent (DT) feature is especially suitable for control applications where the end user will turn a knob inserted in the potentiometer. Detents can be used to…
ACP’s patented detent (DT) feature is especially suitable for control applications where the end user will turn a knob inserted in the potentiometer. Detents can be used to…
Should the shaft need to be positioned differently than shown on the “models” section on this catalogue, a drawing with the exact position is kindly requested….
By default, terminals are always straight, as shown on the “models” section. ACP can provide crimped terminals (with snap in, “SNP” or “SNJ”), to better hold the component to the…
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications. Mechanical life with cut track…
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications. Mechanical life with cut track…
Accessories can be mounted on potentiometers through either the front side (WT) or the collector side (WTI). For the specific angular position of shafts with planes, a drawing…
ACP’s patented detent (DT) feature is especially suitable for control applications where the end user will turn a knob inserted in the potentiometer. Detents can be used to…
Rotors are drawn in their standard positioning, 50% of rotation. Alternative delivery positioning can be requested. Accessories in this catalogue are designed for the M rotor, unless otherwise…
…potentiometer is -25ºC to +70ºC. When the temperature goes up to 85ºC, the following variations should be observed:Load life 1.000 h. at 50ºC +0%; -6% 1.000 h. at 85ºC +0%;…
…16 h at 85ºC, plus 2 h at –25ºC ±2.5% 16 h at 90ºC, plus 2 h at –40ºC ±2% Load life 1.000 h. at 50°C +0%; -5% 1.000 h….