Q16 How to order

EXAMPLE: Q16RV15-10KA3030 LV10 16DT 3N PDT1

Standard features

Series Rotor Model Packg. Ohm value Taper Tolerance Life Nº Detents Det. Torque Terminals Flamability Position
1 2 3 4 5 6 7 8 9 10 11 12 13
Q16 R V15 - 10K A 3030 LV10 16DT 3N PDT1
Standard configuration: Q16
Dimensions: 16x15mm
Protection: IP 54,On request: Self extinguishable, to meet UL 94 V0
Core potentiometer: CS14
Packaging: Bulk
Wiper position: Detent 1 (PDT1)
Terminals: Straight
Marking: Resistive value marked on housing. Others on request.

1 Series

Q16

2 Rotors

R Others under study

3 Model and Pitch

V15 VSMD under study

4 Packaging

Packaging through-hole
Bulk (blank)...(1)
(1) If blank, bulk packaging is implied.

5 Resistance Value

100Ω 200Ω 220Ω 250Ω 470Ω 500Ω 1KΩ 10KΩ Standard ... 5MΩ
100 200 220 250 470 500 1K 10K 5M

6 Resistance law / taper

Lin - Linear A
Others under study. Code will be assigned case by case.

7 Tolerance

100Ω ≤ Rn ≤ 100KΩ: 100KΩ < Rn ≤ 1MΩ: 1MΩ < Rn ≤ 5MΩ:
±30% ±30% +50%, -30%
3030 3030 5030

8 Operating Life (Cycles)

Standard (10.000 turns) LV10
Long life: LV + number of turns. ex: LV20 for 20.000 turns LVXX: ex: LV20

9 Detents (DT)

Standard: 16 detents 16DT
Other configuration under study

10 Detent torque

Standard: 3 Ncm 3N
Others available 4Ncm, 5Ncm, 6Ncm 4N, 5N, 6N

11 Terminals

By default, terminals are always straigh (leave blank)
SNAP IN P SNP
Steel Terminals SH

12 Flammability

Standard: Non self extinguishable (leave blank)
All housings and rotors self extinguishable according to UL 94 V0 V0
Only Q16 housing and rotor self extinguishable V0 Q-V0

13 Delivery position

Standard, position at detent 1 PDT1
Position at detent. XX= (position number) PDTXX

Special Marking

Special marking GRE