­

CA14 – CE14 How to order

EXAMPLE: CA14NV12,5-10KA2020 10DT SNP PI WT-14117-BA
EXAMPLE: CE14NV12,5-10KA2020 10DT SNP PI WT-14117-BA-V0

Standard features

Series
1
Rotor2
Model3
Packg.4
Ohm value5
Taper6
Tolerance7
Life8
CA14-CE14
RotorM
ModelH2,5
Packg.-
Ohm value-10K
TaperA
Tolerance2020
Life-
Series Rotor Model Packg. Ohm value Taper Tolerance Life
1 2 3 4 5 6 7 8
CA14-CE14 M H2,5 - -10K A 2020 -

Extra features

Track
9
Detents10
Snap in11
Housing12
Rotor13
Wiper14
Linearity15
Detents10DT
Snap inSNP
WiperPI
Track Detents Snap in Housing Rotor Wiper Linearity
9 10 11 12 13 14 15
10DT SNP PI

Assembled accessory

Assembly
-
Ref #16
Color-
Flammability-
WT
Ref #-14117
Color-BA
Flammability-V0
Assembly Ref # Color Flammability
- 16 - -
WT -14117 -BA -V0
Standard configuration:
Dimensions:
CA14 Through-hole14mm
Protection:
CA14 Through-holeIP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0
Substrate:
CA14 Through-holeCarbon technology
CA14 SMDCarbon techonology, special for high temperature
CE14 Through-hole and SMDCermet
Color:
CA14 Through-holeBlue housing + white rotor
CA14 SMDBrown housing + grey rotor
CE14 Through-hole and SMDBrown housing + white rotor
Packaging:
CA14 Through-holeBulk
Wiper position:
CA14 Through-holeat 50% ±15º
Terminals:
CA14 Through-holeStraight, without crimping.
Marking:
CA14 Through-holeResistive value marked on housing. Others on request.
Standard configuration: CA14 Through-hole CA14 SMD CE14 Through-hole and SMD
Dimensions: 14mm
Protection: IP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0
Substrate: Carbon technology Carbon techonology, special for high temperature Cermet
Color: Blue housing + white rotor Brown housing + grey rotor Brown housing + white rotor
Packaging: Bulk
Wiper position: at 50% ±15º
Terminals: Straight, without crimping.
Marking: Resistive value marked on housing. Others on request.

Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes all special specifications. Example: CA14PH2,5-10K CODE C00111.

1 Series

CA14
CA14 CE14

2 Rotors

B
B D E F G K M N P T X Z

3 Model and Pitch

H0
H0 HC0 H2,5 H4 H5 HA5 HL5 V12,5 VA12,5 VL12,5
VR12,5
VR12,5 V15 VJ15 (V15)...CFF V17,5 VD7,5 VD11 VSMD ...CY
HSMD (Under request, not readily available)
HSMD (Under request, not readily available)

4 Packaging

Packaging
Bulk
through-hole(blank)...(1)
SMD models(blank)...(1)
T&R (Tape and 13” reel)
through-hole(N.A.) (2)
SMD modelsT&R
T&R (Tape and 15” reel)
through-hole(N.A.) (2)
SMD modelsT&R15
(1) If blank, bulk packaging is implied. (2) N.A., Not Applicable: Tape and Reel packaging is only available for SMD terminals.
Packaging through-hole SMD models
Bulk (blank)...(1) (blank)...(1)
T&R (Tape and 13” reel) (N.A.) (2) T&R
T&R (Tape and 15” reel) (N.A.) (2) T&R15
(1) If blank, bulk packaging is implied. (2) N.A., Not Applicable: Tape and Reel packaging is only available for SMD terminals.

5 Resistance Value

100Ω
100
200Ω200
220Ω220
250Ω250
470Ω470
500Ω500
1KΩ1K
2KΩ2K
500KΩ500K
1MΩ1M
2MΩ2M
2M2Ω2M2
4M7Ω4M7
5MΩ5M
100Ω 200Ω 220Ω 250Ω 470Ω 500Ω 1KΩ 2KΩ ... 500KΩ 1MΩ 2MΩ 2M2Ω 4M7Ω 5MΩ
100 200 220 250 470 500 1K 2K 500K 1M 2M 2M2 4M7 5M

6 Resistance law / taper

Lin - Linear
Log - Logarithmic
AB
Antilog - Antilogarithmic
AC
- Special tapers have codes assigned:
ACODE YXXXXX
Lin - Linear A
Log - Logarithmic B
Antilog - Antilogarithmic C
- Special tapers have codes assigned: CODE YXXXXX

7 Tolerance

±20%
2020
±30%3030
+50%,-30%5030
±10%1010
±5%0505
±20% ±30% +50%,-30% ±10% ±5%
2020 3030 5030 1010 0505

8 Operating Life (Cycles)

Standard (1.000 cycles)
Long life: LV + the number of cycles. ex: LV10 for 10.000 cycles. (others on request)
(leave blank)LVXX: ex: LV10
Standard (1.000 cycles) (leave blank)
Long life: LV + the number of cycles. ex: LV10 for 10.000 cycles. (others on request) LVXX: ex: LV10

9 Cut Track - Open circuit.

Open circuit at beginning of track, fully CCW
Open circuit at end of track, fully CW
PCIPCF
Open circuit at beginning of track, fully CCW PCI
Open circuit at end of track, fully CW PCF

10 Detents (DT)

One detent at the beginning
One detent at the end
DTIDTF
X number of detents
DTIXDT: 10DT
One detent at the beginning DTI
One detent at the end DTF
X number of detents XDT: 10DT

11 Terminals

SNAP IN P
SNAP IN R
SNPSNR
Shorter tip of terminal, TPXX, where XX is tip length (under request)
SNPTPXX, ex: TP30
Steel Terminals
SNPSH
SNAP IN P SNP
SNAP IN R SNR
Shorter tip of terminal, TPXX, where XX is tip length (under request) TPXX, ex: TP30
Steel Terminals SH

12 Housing

Color: For colors other than standard: -See color chart below-
Color: For colors other than standard: -See color chart below- CJ-color, ex., red: CJ-RO

13 Rotor

Color: For colors other than standard: -See color chart below-
* Self-extinguishable property, V0, for housing and rotor:By default, carbon is non self-extinguishable, cermet is Self-extinguishable:For carbon: self-extinguishable property can be added. V0 means housingand rotor are V0. If only the housing needs to be V0, then CJ-V0.If only rotor: RT-V0
RT-color; ex., blue: RT-AZCJ-V0, RT-V0(blank)V0
Color: For colors other than standard: -See color chart below- RT-color; ex., blue: RT-AZ
* Self-extinguishable property, V0, for housing and rotor:By default, carbon is non self-extinguishable, cermet is Self-extinguishable:For carbon: self-extinguishable property can be added. V0 means housingand rotor are V0. If only the housing needs to be V0, then CJ-V0.If only rotor: RT-V0 CJ-V0, RT-V0(blank)V0

14 Wiper

Wiper position (Standard: 50% ± 15º)
Initial or CCW
(leave blank)PI
Final or CW
(leave blank)PF
Others: following clock positions; at 3 hours: P3H
(leave blank)PXH, ex: P3H
Wiper torque (Standard: <2.5Ncm, for detents: <3.5)
(leave blank)(leave blank)
Low torque, < 1.5Ncm
(leave blank)PGB
Wiper position (Standard: 50% ± 15º) (leave blank)
Initial or CCW PI
Final or CW PF
Others: following clock positions; at 3 hours: P3H PXH, ex: P3H
Wiper torque (Standard: <2.5Ncm, for detents: <3.5) (leave blank)
Low torque, < 1.5Ncm PGB

15 Linearity

Not controlled
Independent linearity controlled & below x%, for example, 3%: LN3%
(leave blank)LNx%; ex: LN3%
Absolute linearity controlled & below x%
(leave blank)LAx%
Not controlled (leave blank)
Independent linearity controlled & below x%, for example, 3%: LN3% LNx%; ex: LN3%
Absolute linearity controlled & below x% LAx%

16 Potentiometers with assembled accesories

Assembled from terminal side
Assembled from collector side
WTWTI
Accessory ReferenceSee list of shafts and thumbwheels available
WT-XXXXX Example: 14117
Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.)
WT-YY Example, white: BA(leave blank)-V0
For ordering spare accessories: Accessory reference - color- flammability. Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel
WTXXXX-YY-V0
Assembled from terminal side WT
Assembled from collector side WTI
Accessory ReferenceSee list of shafts and thumbwheels available -XXXXX Example: 14117
Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.) -YY Example, white: BA(leave blank)-V0
For ordering spare accessories: Accessory reference - color- flammability. Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel XXXX-YY-V0

Color chart for rotor, housing and accessories

Black (1)
NE
WhiteBA
NeutralIN
Transp.TA
RedRO
GreenVE
YellowAM
BlueAZ
GreyGS
BrownMR
(1) black is not an option for housing.
Black (1) White Neutral Transp. Red Green Yellow Blue Grey Brown
NE BA IN TA RO VE AM AZ GS MR
(1) black is not an option for housing.